Start with the vehicle placard and applicable records
Request clear photographs of the relevant tyre placard, fitted tyre markings and wheels. Match them to the model family and original configuration. Different years and trims can have different approved combinations, so one regional brochure should not be treated as a catalogue for every CS75 or PLUS.
The model-year guide helps identify the candidate before fitment is discussed. If the current tyres differ from the available records, ask a qualified tyre professional or workshop to assess the discrepancy. Do not assume that a tyre is suitable simply because it is already fitted.
Read the whole specification, not only wheel diameter
Tyre markings contain more than a rim diameter. Width, aspect ratio, construction and service descriptions all matter to selecting an appropriate replacement. Have the supplier confirm the complete requirement against the vehicle documentation. A quote headed only 18-inch or 19-inch leaves too much unresolved for an order.
Avoid recommending an alternative size from a simple online diameter comparison. Clearance, load capacity, wheel specification and the vehicle’s approved requirements need proper assessment. The dealer’s role is to collect accurate evidence and obtain a competent fitment decision for the particular car.
Inspect condition as well as tread appearance
Request a condition assessment covering wear pattern, visible damage, repairs and relevant age information. A photograph taken from directly above the tread may miss sidewall concerns. Ask the inspector to identify any issue that needs replacement or further assessment and to explain the basis rather than assigning an unsupported remaining-life percentage.
The used CS75 inspection guide places tyre findings alongside steering, suspension and braking checks. Uneven wear can justify further investigation, but it is not a diagnosis of one specific alignment or suspension fault. Record the symptom and the recommended next step separately.
Check the set, not just the best tyre
Ask for records of every fitted tyre, including the relevant spare arrangement where supplied. Note mismatches and obtain professional advice on their significance for the actual vehicle. A seller’s photo of one nearly new tyre does not describe the condition or suitability of the complete set.
For a four-wheel-drive candidate, have the workshop assess compatibility with that system’s requirements. The drivetrain verification guide helps establish which configuration is involved. Do not apply generic replacement rules from another vehicle without checking the correct guidance.
Identify wheel changes and associated equipment
Ask whether the wheels are original or aftermarket and request identification where changes have been made. Inspect visible damage and have mounting or fitment concerns assessed appropriately. A cosmetic upgrade can create additional questions about clearance, ratings and the equipment fitted to the wheel.
Where tyre-pressure monitoring is specified, request a functional check and clarification of any warning. Do not assume every sensor issue is solved by inflating a tyre, or that an aftermarket wheel includes compatible components. Keep confirmed condition and unresolved equipment questions in the preparation record.
Quote replacements on a defined basis
A replacement quote should identify the complete specification, quantity, product, fitting scope and any related work. Distinguish an estimate from a confirmed offer and ask whether the proposed set is suitable for the destination use. Do not present a locally unavailable tyre as a guaranteed low-cost future replacement.
Add known replacement needs to the ownership and preparation budget. If the seller agrees to replace tyres before handover, request evidence of the actual installed set. An invoice line saying new tyres is less informative than identification and photographs of what was supplied.
What to do with an advertised wheel upgrade
If a seller highlights larger aftermarket wheels, ask whether the original set is available and which configuration the customer actually wants. Obtain a fitment assessment and condition record before treating the change as added value. The buyer may prefer documented original equipment or need easier local tyre supply. Keep removal, replacement and any associated work visible in the quote. A visual upgrade can be attractive, but its commercial value depends on verified suitability and the customer’s requirements.
Give Panda a useful wheel-and-tyre requirement
Include accepted years, model family and any essential original wheel preference. State destination conditions and whether you require replacement of tyres that fail the agreed inspection criteria. Ask for the placard, all fitted markings and a complete condition record when candidates are proposed.
For new offers, confirm the production specification rather than assuming the advertised promotional wheel appears on every trim. For used offers, distinguish the factory arrangement from later changes. This creates a clear fitment and preparation decision without publishing an unverified universal tyre size for the whole CS75 range.
